Product Name:Respiratory Protection Mask | Model:MLD-E02 | Class: FFP2 NR

Standard: EN:149:2001+A1:2009 Regulation (EU) 2016 / 425 | Specifications: 10.5cm *15.5 cm (after folding)

Intended use:this product is a protection used in the general work environment. It is designed to provide reliable respiratory protection against airborne particles, dust, and to block bodily fluids including micro-droplets.

Product composition:Spunbond non-woven polypropylene fabric, melt-blown polypropylene fabric, PE+metal nose clip, Spandex ear elastic, hot air cotton.

Instructions for use:

1. Hold the mask in your hand, the nose clip at the tip of your fingers.
2. Pull the elastic bands behind your ears and mold the nose clip to the shape of your nose. Pull the bottom of the mask until it covers your chin and cheeks.
3. Make sure the nose clip is well molded around the nose, pressing the ends against the cheek to achieve a good seal.
4. To check the fit, place both hands on the mask and exhale forcefully. If air leaks around the nose, tighten the nose clip; if air leaks around the edge, reposition the ear strap for a better fit.
5. Repeat the adjustments until the mask is properly fitted.

Instructions for removing and disposing of the mask：

1. To remove the mask, use your thumbs and index fingers to remove the two ear elastics.
2. dispose of the used mask carefully.
3. Wash or disinfect your hands

All technical documentation (Test reports, CE Certificate, manual, Declaration of conformity, etc.) is available upon request.